Vacuum Suction Cups Special For Metal Plate Bellows Suction Cup MAB
1. Introduction and applicaton
- For quick handling of metal sheets (short cycle).
- No dents or deformations when handling metal sheets.
- Handling of pre-shaped metal sheet parts since bellows shape permits optimum adaptation;
- For use in handling system for stamping lines in the automotive industry.
- The bottom of the suction cup has a special groove structure to prevent the oily metal plate from sliding during handling,ensuring accurate positioning of the workpiece in stamping press.
2. Structure
- Robust and wear-resistant suction cup SAB with 1.5 folds, made of NBR, special groove and inner support design;
- Vulcanizing fixed the suction cup and the joint (high strength);
- Suction cup available with various connection types;
3. Technology data:
| Type | Suction Force | Pull-off force | Lateral force | Lateral force oily surface | Volume | Workpiece radius min |
| [N] | [N] | [N] | [N] | [cm3] | [mm] (Convex) |
| MAB 30 NBR-60 | 22 | 33 | 30 | 13 | 5.9 | 40 |
| MAB 40 NBR-60 | 38 | 59 | 36 | 33 | 7 | 40 |
| MAB 50 NBR-60 | 53 | 87 | 55 | 52 | 11.5 | 50 |
| MAB 60 NBR-60 | 82 | 130 | 82 | 77 | 24 | 65 |
| MAB 80 NBR-60 | 135 | 221 | 145 | 140 | 56.5 | 75 |
| MAB 100 NBR-60 | 190 | 357 | 220 | 214 | 92.5 | 90 |
4. Design data:
Bellows Suction Cups MAB.pdf
