Vacuum Cup Fittings Vacuum Sealed Ball Joints MGL Copper Materials
1. Introduction and application:
- Connect large suction cups for workpieces with inclined surfaces.
- When transporting large workpieces (such as metal thin plates and wood plates), the workpiece usually has a state of drooping at both ends and sag in the middle.The suction cups can tilt at a certain angle to keep good contact with the workpieces to prevent it from falling off when you use a flexible joint.
- The flexible joint can be used in combination with the spring buffer strut to compensate and adjust the height difference and uneven surface of the workpiece.
2.Technology Data:
| Type | Vertical load [N] | Deflection:max.[°] | Weight [g] |
| MGL G1/4-IG G1/4-AG | 1500 | 15 | 67 |
| MGL G1/2-IG G1/2-AG | 2500 | 15 | 116 |
***Note: MGL IG(internal thread) AG(external thread)
3.Design Data
| Type | Size(MM) |
| DN | G1 | G2 | H | LG1 | LG2 | SW1 | W(°) |
| MGL G1/4-IG G1/4-AG | 3.5 | G1/4''-F | G1/4''-M | 37.5 | 12 | 10 | 19 | 15 |
| MGL G1/2-IG G1/2-AG | 4 | G1/2''-F | G1/2''-M | 40 | 14 | 12 | 24 | 15 |
Ball Joints MGL.pdf
