Vacuum Cup Fittings Flexible Joint MLK Stainless Steel Materials
1. Introduction and application:
- When transporting large workpieces (such as metal thin plates and wood plates), the workpiece usually has a state of drooping at both ends and sag in the middle.The suction cups can tilt at a certain angle to keep good contact with the workpieces to prevent it from falling off when you use a flexible joint.
- The flexible joint can be used in combination with the spring buffer strut to compensate and adjust the height difference and uneven surface of the workpiece, and can be automatically reset.
2. Features:
- Corrosion resistance: stainless steel joints are adopted at both ends, which has good corrosion resistance. The tightness is ensured.
- Beautiful appearance: the appearance of metal joint is clear and bright.
- High pressure resistance: taking into account the actual working pressure, working environment and working conditions of metal soft joints, all parameters have been carefully calculated and tested repeatedly to ensure their pressure-bearing safety in work.
- Earthquake prevention and dislocation prevention: good flexibility and displacement compensation characteristics
3. Technology Data:
| Type | Vertical load [N] | Bending moment [Nm] | Weight [g] |
| MLK G1/4-IG G1/4-AG | 750 | 10 | 30 |
| MLK G1/2-IG G1/2-AG | 3000 | 50 | 100 |
***Note: MLK IG(internal thread) AG(external thread)
4. Design Data
| Type | Size(MM) |
| DN | G1 | G2 | H | LG1 | LG2 | SW1 | W(°) |
| MLK G1/4-IG G1/4-AG | 3 | G1/4''-F | G1/4''-M | 27 | 12 | 12 | 17 | 12 |
| MLK G1/2-IG G1/2-AG | 6 | G1/2''-F | G1/2''-M | 33.5 | 14 | 14 | 27 | 12 |
Flexible joint MLK.pdf
