Valves are used to control the vacuum as well as the compressed air. The right valves can increase both the process reliability and the cost-effectiveness of the vacuum system.

For handling breathable workpieces
Reduce the suction cup volume flow without contacting the workpiece and maintain the system vacuum
Can be installed at any position.
Handling of workpieces with varying sizes and shapes with the same gripping system

2. Design

Threaded joint with cross section at both ends
Wide range of apertures for different volumetric flows

3. Advantages

Robust construction and long service life;
Automatically reduces the vacuum channel section, especially suitable for handling breathable workpieces;
Suitable for narrow space.

4. Technology Data

Type	Nominal diameter	Evacuation rate for pu = -0.3 bar	Evacuation rate for pu = -0.3 bar	Evacuation rate for pu = -0.6 bar	Evacuation rate for pu = -0.6 bar
Type		[m3 /h]	[l/min]	[m3 /h]	[l/min]
SW 25	0.25mm	0.01	0.2	0.02	0.3
SW 40	0.40mm	0.06	1	0.08	1.3
SW 50	0.50mm	0.13	2.2	0.15	2.5
SW 60	0.60mm	0.18	3	0.19	3.1
SW 70	0.70mm	0.24	4	0.26	4.3
SW 80	0.80mm	0.3	4.9	0.32	5.3
SW 90	0.90mm	0.39	6.5	0.42	7
SW 100	1.00mm	0.47	7.8	0.5	8.4
SW 110	1.10mm	0.62	10.3	0.63	10.5
SW 120	1.20mm	0.74	12.3	0.76	12.7
SW 150	1.50mm	1.32	22	1.4	23.4
SW 200	2.00mm	2.05	34.1	2.18	36.4

Throttle Valve.pdf

Product Tags:

double acting cylinder control valve

cylinder control valve

check dual plate valve

Inquiry Cart 0