Vacuum Valve 2/3 Way Vacuum Solenoid Valve MVV D Aluminum Alloy Material
1. Introduction and application
- The valve is a 2/3-way pneumatically controlled cone valve with a normally open or close type.
- This valve is commonly used in vacuum cut-off of feeders, suction type stackers, robots, openers, etc. where it is necessary to react quickly between the suction in the line and the intake air.
2. Design
- The body is made of aluminum alloy.
- (4) is the compressed air inlet.
- The integrated solenoid valve is mounted on the machine body and is convenient to control.
- When the valve is used normally open, (1) is the vacuum pump interface, (2)is the pressure relief port, and (3) is the action port.
- When the valve is used as a normally closed, (1 is the pressure relief port, (2 is the vacuum pump interface, and (3 is the action port.
3. Technology Data:
| Type | Maximum flow | Minimum vacuum | Maximum vacuum | Excitation reaction time | Degaussing reaction time | Bore diameter | Through hole area | Control pressure | Weight |
| | [cum/h] | [mbar abs] | [mbar abs] | [msec] | [msec] | [mm] | [mm2 ] | [bar] | [Kg] |
| MVV G1/4 D NC/NO | 6 | 1000 | 0.5 | 16 | 27 | 8.5 | 56.8 | 4…7 | 0.56 |
| MVV G3/8 D NC/NO | 10 | 1000 | 0.5 | 16 | 27 | 11.5 | 103.8 | 4…7 | 0.54 |
| MVV G1/2 D NC/NO | 20 | 1000 | 0.5 | 16 | 40 | 15 | 176 | 6…8 | 0.73 |
| MVV G3/4 D NC/NO | 40 | 1000 | 0.5 | 16 | 40 | 20 | 314 | 6…8 | 1.25 |
| MVV G1 D NC/NO | 90 | 1000 | 0.5 | 18 | 42 | 25 | 490 | 6…8 | 1.16 |
| MVV G1 1/2 D NC/NO | 180 | 1000 | 0.5 | 60 | 38 | 40 | 1256 | 6…8 | 4.79 |
