Vacuum Regulating Valve Technology MVRV With Aluminium Alloy Material
1. Introduction and application
- This product is mainly used in workshops where different vacuum levels are required in a centralized control factory or where the pressure of each suction part needs to be adjusted.The operating low pressure must be lower than the main low pressure.
- The body is made of aluminum alloy
- P is a vacuum pump interface
- A is the working port
- The adjusting screw can adjust the vacuum at working port A.
4.Design Data
| type | Size(MM) |
| B | D | G1 | G2 | G3 | H | H1 | L | X1 | Z |
| MVRV G1/4 | 60 | 6.5 | G1/4"-F | G1/4"-F | G1/8"-F | 40 | 70 | 89 | 40 | 10 |
| MVRV G3/8 | 60 | 6.5 | G3/8"-F | G3/8"-F | G1/8"-F | 40 | 70 | 89 | 40 | 10 |
| MVRV G1/2 | 85 | 8.5 | G1/2"-F | G1/2"-F | G1/4"-F | 50 | 80 | 105 | 63 | 10 |
| MVRV G1 | 100 | 8.5 | G3/4"-F | G3/4"-F | G1/4"-F | 50 | 80 | 110.5 | 63 | 10 |
| MVRV G3/4 | 120 | 8.5 | G1"-F | G1"-F | G1/4"-F | 60 | 90 | 118 | 63 | 10 |
| MVRV G1 1/2 | 160 | 8.5 | G1"1/2-F | G1"1/2-F | G1/4"-F | 99 | 129 | 131.5 | 63 | 10 |
Vacuum Regulating Valve MVRV.pdf
