Vacuum Valve Technology Direct Acting 2/3 Way Vacuum Solenoid Valve MO
1. Introduction and application
- Solenoid valve for use at high volume flow rates in systems with large cross sections
- Control of vacuum and venting of the suction cup
- Suitable for neutral or filtered air
- Valve with large nominal diameter
- Directly controlled
- Control of vacuum on/off or venting function
- Suitable for lines with large nominal flow rates
- Short opening and closing times
2. Design
- The body is made of aluminum alloy.
- Solenoid valve controls piston action.
- When the valve is used normally open, (1) is the vacuum pump interface, (2) is the pressure relief port, and (3) is the action port.
- When the valve is used as a normally closed, (1) is the pressure relief port, (2) is the vacuum pump interface, and (3) is the action port.
3. Technolody Data
| Type | Maximum flow | Minimum vacuum | Maximum vacuum | Excitation reaction time | Degaussing reaction time | Bore diameter | Through hole area | Weight |
| [cum/h] | [mbar abs] | [mbar abs] | [msec] | [msec] | [mm] | [mm2 ] | [Kg] |
| MO G1/2 NC | 20 | 850 | 0.5 | 30 | 15 | 15 | 176 | 1.53 |
| MO G1/2 NO | 20 | 850 | 0.5 | 20 | 18 | 15 | 176 | 1.53 |
| MO G3/4 NC | 40 | 850 | 0.5 | 30 | 15 | 20 | 314 | 1.5 |
| MO G3/4 NO | 40 | 850 | 0.5 | 20 | 18 | 20 | 314 | 1.5 |
| MO G1 NC | 90 | 850 | 0.5 | 38 | 18 | 25 | 490 | 1.91 |
| MO G1 NO | 90 | 850 | 0.5 | 25 | 20 | 25 | 490 | 1.91 |
| MO G1 1/2 NC | 180 | 850 | 0.5 | 75 | 50 | 40 | 1256 | 5.9 |
| MO G1 1/2 NO | 180 | 850 | 0.5 | 70 | 60 | 40 | 1256 | 5.9 |
Direct Acting 2&3-Way Vacuum Solenoid Valve MO.pdf...
