Lifting Cylinder MVB With Short Cycle And Controlled By A Single Vacuum Throttle Valve
1. Introduction and application
- When vacuum is introduced, the suction cup installed on the lifting cylinder will quickly extend out with the cylinder piston,and automatically lift and keep the adsorption state after contacting the sucked object.
- Short cycle, controlled by a single vacuum throttle valve,automatically compensates the height of the sucked object, the piston does not rotate, and the operation is simple.
- It can be used to adsorb objects machined, molded or thermoformed. It can also be used to separate paper, plastic, steel plate, etc
2.Technical Data
| Type | -80KPa | -80KP | Minimum cycle time | Minimum vacuum degree | Minimum flow during operation | Working temperature |
| | thrust [N] | Lifting force [N] | [s] | [-Kpa] | [Nl/s] | [℃] |
| MVB 5 | 20 | 4.5 | 0.3 | 60 | 15 | 5…80 |
| MVB 10 | 43 | 10 | 0.4 | 60 | 30 | 5…80 |
| MVB 15 | 120 | 25 | 0.6 | 60 | 90 | 5…80 |
3.Design Data
| Type | Dimensions[mm] |
| D1 | D2 | G1 | G2 | G3 | G4 | H | SW1 | SW2 | SW3 | Z |
| MVB 5 | 24 | 10 | M5-F | M5-F | M6-F | M16x1.5-F | 51.5 | 19 | 24 | 8 | 17 |
| MVB 10 | 35 | 15 | G1/8-F | M5-F | G1/8-F | M22x1.5-F | 72 | 27 | 32 | 12 | 25 |
| MVB 15 | 59 | 22 | G1/4-F | G1/8-F | M10-F | M40x1.5-F | 93 | 50 | 55 | 17 | 30 |
